Notice: you're looking at a read-only mirror of our Dokuwiki.
3D Printers
Prusa i3 MK3 (@???)
- owner: @hadn69
- status: out of service
- print method: octoprint (octoprint is currently oos)
Specs
| spec |
stat |
| Build Volume |
250 x 210 x 200mm |
| Max Nozzle Temperature |
300° C |
| Max Bed Temperature |
100° C |
last checked 7/7/26 needs nozzle/bed calibration, should be otherwise good to go?
Bambu P2S (@lily)
- owner: @lily
- status: in service
- print method: Studio PC (BambuSlicer), any PC (
Orca/BambuSlicer)
- Currently has some issue starting prints directly from OrcaSlicer, default to BambuSlicer at this time.
Printing
- Open BambuSlicer
(Or OrcaSlicer)
- Install Network Plugin, if prompted
- Navigate to 'Device' tab
- Select 'No Printer +' and select 'P2S-Root'
- When prompted, enter the Access Code, which can be found via the control panel of the printer on the main settings page.
- Return to the 'Prepare' tab, ensure all printer settings are correct.
- Bed type: Textured PEI
- Nozzle: 0.4mm (Hardened Steel)
- Flow: Standard
- Slice and Print!
Specs
| spec |
stat |
| Build Volume |
256 x 256 x 256mm |
| Max Nozzle Temperature |
300° C |
| Max Bed Temperature |
110° C |
| Active Chamber Heating |
N/A |
| Build Plate |
Textured PEI |
| Nozzle Size (Type) |
0.4mm (Hardened Steel) |
Qidi Q1 Pro (@enzi)
- owner: @enzi
- status: in service
- print method: USB
On loan to the space starting 7/5/26 until further notice!
Todo (as of 7/7/26):
Printing
- On any PC, fire up orcaslicer
- Load up the Q1 pro preset with the 0.6 nozzle (as of 7/21)
- Slice, export to an exfat/fat32 formatted drive (it's not picky)
- Plug in at the top right
- Pick your print on the display!
Notes
- Filament loader needs to be changed at some point (it's jammed against the rack right now)
- Have experienced some speghettification (as of 7/21) so the bed might need a wash
- The rails are very thirsty for lube...
Specs
| spec |
stat |
| Build Volume |
245 x 245 x 245mm |
| Max Nozzle Temperature |
370° C |
| Max Bed Temperature |
120° C |
| Active Chamber Heating |
60° C |
| Build Plate |
Textured PEI |
| Nozzle Size (Type) |
0.6mm (Unknown) |
VzBoT-330 (@lily)
- owner: @lily
- status: out of service
- print method: none
Cool Description